Ignition Control Circuit Board for Atwood AC/Gas Water Heaters That Have Both 4 Position And 6 Position Edge Style
10 Pin Style Connector
Can Also Be Use In Older Furnaces Water Heaters And Refrigerators That Use A Standard Igniter Board With A 6 position Edge Or Pin Style Connector By Configuring Jumpers On The Board
12 Volt DC
Dinosaur universal 12 Volt DC ignitor boards are certified by Testing Engineers International to meet UL 372 and UL 353 specifications for use in the RV industry.
Universal ignitor board specialized to work in Atwood’s® AC/Gas water heaters with 4 + 6 header pin or edge style connectors, or with the single 10 pin connector used in Atwood's® latest models. By resetting the jumpers it can function like a UIB S ignitor board so it can be configured to replace standard DSI ignitor boards that use a single 6 position connector found in older water heaters, refrigerators and furnaces.
Compatibility: Atwood ® AC/Gas Water Heaters That Have Both 4 And 6 Position Edge Style/ 10 Pin Style Connector
Voltage: 12 Volt
Length (IN): 4-1/4"
Width (IN): 3-1/4"
Voltage: 12 Volt
Length (IN): 4-1/4"
Width (IN): 3-1/4"
Features:
- TEI Certified
- 12 Volt DC Operation
- Jumper Configurable For Universal Applications
- Fuse And Surge Protected
- 3 Diagnostic LEDs
- By Resetting The Jumpers It Can Function Like A UIB S Ignitor Board So It Can Be Configured To Replace Standard DSI Ignitor Boards That Use A Single 6 Position Connector
- Limited 3 Year Warranty
